PSS PS600 Manual do Operador descarregar pdf (Página 27)

Setting up the form conveyor

The form conveyor collects the forms from the out-feed and stacks them (either

overlapping or separated) ready for removal. To fit and set-up the conveyor, proceed as

follows:

1. Clip the conveyor over the locating lip on the out-feed of the machine, plug it in

to the mains output socket (see Figure 12) and turn it on.

2. Loosen the securing screw and adjust the entrapment roller according to the

form size (close to out-feed for short forms; further away for larger forms).

3. Adjust the overlap control as required (0 = most overlap; 10 = greatest

separation).

PS 600 3. Set-up

22-01-03 Iss. B. Page 23

Entrapment

Roller

Entrapment

Roller

Locating

Clip

(x2)

Overlap

Control

Securing

Screw

Locating

Lip

Mains Output

Socket

Figure 12: Conveyor Setup

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 46 47

Sem comentários

PSS PS600 Manual do Operador Página 27